AMD MI300X
vs
Nvidia RTX 5060 Ti
A data center GPU against a consumer card, one CDNA 3 and one Blackwell: 192 GB HBM3 against 16 GB GDDR7, 10x the memory bandwidth on the MI300X, and Infinity Fabric 896 GB/s on the MI300X where the RTX 5060 Ti is PCIe only.
At a glance
Updated 3 minutes ago- Memory
- 192 GB
- HBM3
- Memory bandwidth
- 5.30 TB/s
- From
- $2.39 /GPU/hr
- 10 providers
- Memory
- 16 GB
- GDDR7
- Memory bandwidth
- 512 GB/s
- From
- $0.09 /GPU/hr
- 3 providers
Price comparison
Cheapest listed price per GPU per hour by billing type, and the median across providers.
| Billing | MI300X | RTX 5060 Ti | Difference |
|---|---|---|---|
| On-demand | $2.39 | $0.09 | 27x more expensive on MI300X |
| Spot | $1.60 | $0.06 | 29x more expensive on MI300X |
| Reserved | $1.61 | $0.08 | 20x more expensive on MI300X |
| Median | $2.91 | $0.13 | 22x more expensive on MI300X |
Median: Median across providers, one vote each, so a large catalog does not outweigh a small one.
Price history
MI300X vs RTX 5060 Ti price history
Weekly median on-demand price per GPU per hour
Specs comparison
| Spec | MI300X | RTX 5060 Ti | Difference |
|---|---|---|---|
| Memory | |||
| Capacity | 192 GB HBM3 | 16 GB GDDR7 | 12x more on MI300X |
| Bandwidth | 5,300 GB/s | 512 GB/s | 10x higher on MI300X |
| Bus width | 8,192-bit | 128-bit | 64x wider on MI300X |
| Compute · dense | |||
| FP4 | Not supported | 379.5 TFLOPS | RTX 5060 Ti only |
| FP8 | 2,614.9 TFLOPS | 94.8 TFLOPS | 28x higher on MI300X |
| FP16 / BF16 | 1,307.4 TFLOPS | 47.4 TFLOPS | 28x higher on MI300X |
| INT8 | 2,614.9 TOPS | 189.6 TOPS | 14x higher on MI300X |
| FP32 | 163.4 TFLOPS | 23.7 TFLOPS | 6.9x higher on MI300X |
| FP64 | 81.7 TFLOPS | Not supported | MI300X only |
| Platform | |||
| Interconnect | Infinity Fabric 896 GB/s | PCIe only | Infinity Fabric on MI300X only |
| Board power | 750 W | 180 W | 4.2x higher on MI300X |
| Released | Q4 2023 | Q2 2025 | 16 months newer on RTX 5060 Ti |
| Precision | |||
| Supported formats | FP8FP16BF16TF32FP32FP64INT8 | FP4FP8FP16BF16TF32FP32INT8 | |
Figures are for each model's headline configuration. Where a form factor carries a different number, it is named under the figure.
Compute: Vendor peak figures, dense and per GPU. Not measured throughput.
Source: MI300X datasheet and RTX 5060 Ti datasheet.
Where to rent them
Providers listing these GPUs, those with both first, so you can switch without moving clouds.
| Provider | MI300X /GPU/hr | RTX 5060 Ti /GPU/hr |
|---|---|---|
Runpod
|
On-Demand $2.39 | -- |
DigitalOcean
|
On-Demand $2.59 | -- |
Cyfuture AI
|
On-Demand $2.78 | -- |
Hot Aisle
|
On-Demand $2.99 | -- |
Oracle Cloud
|
On-Demand $6.00 | -- |
Azure
|
On-Demand $7.86 | -- |
Cirrascale
|
Reserved (12mo) $3.12 | -- |
Crusoe
|
Reservation on request | -- |
Vast.ai
|
-- | On-Demand $0.09 |
Theta EdgeCloud
|
-- | On-Demand $0.10 |
Salad
|
-- | On-Demand $0.18 |
10 providers list the MI300X and 3 the RTX 5060 Ti. Every listing is on the MI300X page and the RTX 5060 Ti page.
Similar GPUs
Other comparisons in the same class.
Our data for AMD MI300X was last updated on Sept. 7, 2026, and for Nvidia RTX 5060 Ti on Sept. 7, 2026.